Massey Ferguson 241 DI vs Farmtrac 42 Promaxx: Price and Features

When comparing the Massey Ferguson 241 DI vs Farmtrac 42 Promaxx, they may have the same horsepower, but work differently in the field. While both tractors come under the 42 HP category, they differ in gearbox design, PTO type, and lifting capacity. Many farmers also search for Massey Ferguson 241 DI price and Farmtrac 42 Promaxx price before they decide, along with the Massey Ferguson 241 DI vs Farmtrac 42 which is a better question.

• The Massey Ferguson 241 DI offers a simple, proven build, backed by sealed dry disc brakes
• Farmtrac 42 Promaxx offers a wider gear range and a Multi Speed and Reverse PTO (MRPTO) for changing loads

However, if you are still stuck between which one to choose, this blog is for you. We will walk through a detailed comparison based on the specifications and strong points of both models, covering Massey Ferguson 241 DI specifications and Farmtrac 42 Promaxx specifications side by side.

Massey Ferguson 241 DI vs Farmtrac 42 Promaxx: Key Specifications

Both tractors carry the same 42 HP tag, but the numbers behind that figure tell a different story. From engine build to brakes, gearbox, and comfort, each part plays a role in how the tractor performs on your field. Let us break this down section by section.

Engine and Power

The Massey Ferguson 241 DI runs a 3 cylinder engine with 2500 cc capacity, giving 31.33 kW of power, which comes to about 42 HP. This Massey Ferguson 241 DI HP figure is nearly matched by the Farmtrac 42 Promaxx HP output, which also gives 42 HP, at 31.31 kW, using what the maker calls Optimaxx engine technology, built to keep power steady even under load and to hold fuel use in check. 

The Farmtrac also states a torque figure of 176 Nm, which helps it push through tough soil without losing speed. On raw numbers, both tractors sit almost equal in power.

The real difference shows up in how each engine is tuned to handle load, and Farmtrac's design leans more toward tasks like post hole digging and haulage. 

Fuel use also matters here, and buyers checking Massey Ferguson 241 DI fuel efficiency against Farmtrac 42 Promaxx fuel efficiency, or the wider Massey Ferguson 241 DI mileage and Farmtrac 42 Promaxx mileage figures, will find both engines built to keep running costs in check.

Gearbox and Clutch

Here the two tractors take clearly different paths. The Massey Ferguson 241 DI uses a sliding mesh gearbox with 8 forward and 2 reverse speeds, along with a dual clutch setup. This is a simple, well known gear layout used across many tractors in India. 

The Farmtrac 42 Promaxx offers a 12 forward and 3 reverse gearbox, fully constant mesh with helical gears, and gives a choice between single clutch and dual clutch, or a double clutch with an ITPO lever. 

More gear options mean a driver can pick a speed that matches the soil and the job more closely, whether it is a light cultivator pass or a heavy trolley haul.

PTO and Hydraulics

Both tractors run PTO at the standard 540 RPM mark, which fits most common implements like rotavators and threshers. The Massey Ferguson 241 DI uses a single speed PTO with a six splined shaft, giving 540 RPM at 1500 engine RPM. 

The Farmtrac 42 Promaxx offers a Multi Speed and Reverse PTO, known as MRPTO, which lets the tractor change PTO speed based on the load a tool needs. This can help with jobs like post hole digging, where load can shift quickly. 

On lift capacity, the Massey Ferguson 241 DI lifting capacity is 1700 kgf at the lower links. The Farmtrac 42 Promaxx lifting capacity is rated heavy duty at 1800 kg. Both are close, but the Farmtrac holds a small edge here, which can matter when pulling heavier ploughs or a full trolley load.

Brakes and Steering

The Massey Ferguson 241 DI comes with sealed dry disc brakes and mechanical steering. The Farmtrac 42 Promaxx uses disc type oil immersed brakes, along with power steering, either single acting or fully balanced depending on the 2WD or 4WD version. Oil immersed brakes tend to run cooler over long hours, which matters during peak sowing or harvest days when a tractor may run for ten hours straight without much rest.

Size, Weight, and Fuel Tank

The Massey Ferguson 241 DI has a wheelbase of 1785 mm, a weight of 1875 kg and a fuel tank of 47 litres. Its overall length is 3340 mm and width is 1690 mm. The Farmtrac 42 Promaxx is a larger machine. The 2WD version has a wheelbase of 2005 mm, a weight of 1960 kg and a 50 litre tank. 

The 4WD version weighs 2152 kg, and has a wheelbase of 1995 mm. The total length is from 3455 mm to 3570 mm, depending on the variant. The wider turning space required in narrow fields with heavy trailed implements is offset by the greater stability that a larger wheelbase provides when used with heavy implements on the trail, such as the Farmtrac.

Ground Clearance

The Farmtrac 42 Promaxx gives 410 mm ground clearance in the 2WD version and 370 mm in 4WD. The Massey Ferguson 241 DI's ground clearance is not listed in this data, so no direct comparison can be made on this point.

Implement Suitability

Farmtrac lists the 42 Promaxx as suited for cultivators, post hole diggers, trolleys, and threshers, backed by features like the four hole rocker link for cultivator work and MRPTO for changing loads, which is a key part of its implements compatibility. 

The Massey Ferguson 241 DI's specs point to it being a strong fit for common tasks too, given its PTO rating and lift capacity, though the source data does not list specific implement matches, or full implements compatibility details, for it the way it does for the Farmtrac.

Comfort and Build Features

The Farmtrac 42 Promaxx adds several comfort touches not listed for the Massey Ferguson 241 DI in this data, such as a wide platform with a floor mat, side shift gear control, a heat guard with hot air deflector, and soft press pedals to cut down driver fatigue on long days. It also has a single piece bonnet, LED plough lamp, and a chrome finished gear knob. 

These Farmtrac 42 Promaxx features add up to a more comfortable ride on long field days. The Massey Ferguson 241 DI's listed features are simpler by comparison, including a chain stabiliser, check chain, front bumper, and a 7 pin trailer socket, all useful but more basic in nature. Farmers reading a Massey Ferguson 241 DI review often note that this simple set of Massey Ferguson 241 DI features keeps upkeep easy.

Price and Loan Options

The Farmtrac 42 Promaxx price starts from Rs. 6.72 lakh to Rs. 6.82 lakh, while the Massey Ferguson 241 DI costs about Rs. 6.65 lakh to Rs. 7.04 lakh. Many buyers also look at the Massey Ferguson 241 DI price list 2026 and the Farmtrac 42 Promaxx price list 2026 to plan their budget, and check loan options such as Massey Ferguson 241 DI loan EMI or Farmtrac 42 Promaxx loan EMI plans through their dealer or bank. 

If you are searching for the best tractor under 6 lakh or running a wider best 40-45 HP tractor comparison, both these models are worth a close look, alongside other options in the Massey Ferguson vs Farmtrac tractor space. 

Final Word

The two tractors are closely matched at the core numbers, such as HP and PTO speed, and the decision is based on the farmer's priorities. For smaller farms or those doing lighter work day to day, the Massey Ferguson 241 DI is a simple, tried and true gearbox. 

The Farmtrac 42 Promaxx features additional comfort options, oil immersed brakes, greater lift capacity and more options which may make it more suitable for the heaviest hauls or extended field hours. 

Before purchasing either tractor, it is advisable to check a Massey Ferguson 241 DI vs Farmtrac 42 comparison chart and read a Farmtrac 42 Promaxx review, then visit a local dealer for a demo, as the numbers on the spec sheet may not be as important as how your own soil and field size will respond to a tractor.

Website - TractorGuru.in
Instagram - TractorGuru Instagram Page
Facebook - TractorGuru Facebook Page