Massey Ferguson 1035 DI vs. Mahindra 275 DI TU: HP, Price & Specs.

Do you want to buy a 36 HP to 40 HP 2WD tractor under a budget of 6 lakhs? The Massey Ferguson 1035 DI and the Mahindra 275 DI TU are suitable choices in this range. These models are priced between ₹5.65 and ₹5.98 lakh, respectively.

Both of them have a 3 cylinder engine, a 47 litre fuel tank capacity and a water cooled cooling system in their engine. However, they are built for entirely different types of farming requirements. Read the following blog to understand the features of 1035 DI & 275 DI TU and then choose the appropriate one.

Massey Ferguson 1035 DI vs Mahindra 275 DI TU: Key Specifications & Price

This MF 1035 DI vs Mahindra 275 TU comparison goes through engine, gearbox, hydraulics, brakes and steering. Also, it covers price, suitable implements and loan EMI.

Engine Performance

The Massey Ferguson 1035 DI and the Mahindra 275 DI TU specifications start with the engine. This Mahindra model makes 39 HP from 2048 cc, with 33.4 PTO HP and 135 Nm of torque at a rated 2100 RPM.

The Massey makes 36 HP from a bigger 2400 cc block and sends 30.6 PTO HP to the implement. So the Mahindra has the powerful PTO, while the Massey relies on its extra engine capacity for steady pulling.

Both engines are water cooled and run an inline injection pump. The air cleaner differs: dry type on the Massey, oil bath on the Mahindra, which helps in dusty wheat & chickpea fields.

Key Specs

Transmission and Gearbox

Massey Ferguson’s model uses a sliding mesh gearbox with a single clutch. Six forward and two reverse gears come as standard, and an 8F + 2R box is optional. Top speed is 23.8 km/h.

The Mahindra tractor uses a partial constant mesh gearbox with a dry single or dual clutch and 8 forward plus 2 reverse gears, reaching 31.2 km/h forward and 13.56 km/h in reverse. For trolley runs to the market, that higher top speed saves time.

Key Specs

Hydraulics and PTO

• Lifting capacity is 1100 kg on the Massey and 1200 kg on the Mahindra. The Massey has Category-1 linkage with draft, position and response control.
• The Mahindra has a high precision linkage with ADDC, short for automatic depth and draft control.
• The 1100 kg limit keeps the Massey in the light to medium tillage class, so very heavy tools are better avoided.

Brakes, Steering and Comfort

This is where both tractors act differently in the field. The Massey has dry disc (Dura) brakes and manual steering. It has an adjustable seat and raised platform as options and a trolley indicator for haulage. 

The Mahindra has OIB and power steering, which cuts effort over a long day. On the other hand, the Massey turns tighter at 2800 mm against 3260 mm, and that matters in small plots and orchard rows. The Mahindra has 320 mm of ground clearance for uneven soil.

Massey Ferguson 1035 DI vs Mahindra 275 DI TU Price

The Massey Ferguson 1035 DI price in India starts from ₹5.65 lakh to ₹5.91 lakh. The Mahindra 275 DI TU price in India is ₹5.78 lakh to ₹5.98 lakh.

The gap between the two stays between about ₹7,000 and ₹13,000. On-road cost changes with state, insurance and RTO charges, so the exact number is best checked with a local dealer through the TractorGuru price page.

Implements and Crop Use

The Massey Ferguson 1035 DI works with a rotavator, cultivator, disc harrow, MB plough, seed drill, sprayer, reaper and thresher for haulage. The model is best described as ploughing, sowing and threshing on small and medium holdings.

The Mahindra 275 DI TU handles ploughs, harrows, cultivators & rotavators. This tractor is also best suited for small and medium-sized holdings.

Conclusion

Based on specifications, the Mahindra 275 DI TU has a slight edge over the Massey Ferguson 1035 DI, but it costs around ₹7,000 to ₹13,000 more. The Massey Ferguson is a more affordable option and is easier to turn in smaller fields. You can check the full specifications, reviews & expert reviews on both tractor pages by using TractorGuru’s comparison tool.