New Holland
4010
Mahindra
475 DI
Sonalika
DI 750 III 4WD
ENGINE |
New Holland 4010 |
Mahindra 475 DI |
Sonalika DI 750 III 4WD |
|---|---|---|---|
| HP Category | 39 HP | 42 HP | 55 HP |
| Engine Capacity | 2500 cc | 2731 cc | 3707 cc |
| Engine Rated RPM | 2000 RPM | 2000 ± (50) RPM | 1900 RPM |
| Max Torque | 149.6 | 194 | 235 |
| No of Cylinder | 3 | 4 | 4 |
| Air Filter | Oil Bath with pre-cleaner | Wet | Dry/Wet |
| Cooling System | Water Cooled | Water Cooled/Thermostat |
TRANSMISSION (GEARBOX) |
|||
|---|---|---|---|
| Clutch type | Single Clutch | Single, Dual and SLIPTO | Independent |
| Transmission type | Fully Constant Mesh AFD | Partial Constant Mesh (CS),Full Constant Mesh(SS),SLIPTO | Constant Mesh |
| Gear Level Position | - | - | |
| Speed min-max | 2.54 – 28.16 kmph | NA | |
| Reverse speed min - max | 3.11 – 9.22 kmph | - | kmph |
| Forward Gears | 8 | 8 | 12 |
| Reverse Gears | 2 / 8 | 2 | 12 |
| Rear Axle | Straight Axle Planetary Drive | - | |
BRAKES |
|||
|---|---|---|---|
| Brake Type | Mechanical, Real Oil Immersed Brakes | Dry Disc Brakes / Oil Immersed | Oil Immersed Brake |
| Turning radius with brake | 2765 mm | NA | |
STEERING |
|||
|---|---|---|---|
| Steering Type | Mechanical / Power Steering | Mechanical / Power Steering | Power Steering |
POWER TAKE OFF |
|||
|---|---|---|---|
| PTO type | GSPTO and Reverse PTO | 6 Spline | |
| PTO RPM | 540 | 540, 540 &540E, 540 and Reverse | 540/ 540R |
| PTO POWER | 35 HP | 37.4 HP | |
FUEL CAPACITY |
|||
|---|---|---|---|
| Fuel Tank Capacity | 62 litres | 48 litres | litres |
DIMENSION AND WEIGHT |
|||
|---|---|---|---|
| Weight | 1805 kg | 1950 kg | |
| Wheelbase | 1865 mm | 1945 mm | 2320 mm |
| Overall Length | 3410 mm | 3260 mm | |
| Tractor width | 1680 | 1625 | |
| Ground Clearance | 364 | 350 | |
LIFTING CAPACITY (HYDRAULICS) |
|||
|---|---|---|---|
| Lift capacity in kg | 1500 kg | 1700 /2000 kg kg | 2200 kg |
| 3 Point linkage | Two Levers with Draft Control, Position Control, Top Link Sensing, Lift- O-Matic, Response Control, Multiple Sensitivity Control, Isolator Valve. | High precision | |
| Hydraulic Controls | ADDC | ADDC | |
TYRE SIZE |
|||
|---|---|---|---|
| Front | 6 X 16 | 6 X 16 | 9.50 X 24 |
| Rear | 13.6 X 28 | 12.4 X 28 / 13.6 X 28 | 14.9 X 28 |
ADDITIONAL FEATURES |
||||
|---|---|---|---|---|
| Drive type | 2WD | 2WD | 4WD | |
| Accessories | Tools,Bumpher,Ballast Weight,Top Link,Canopy,Hitch,Drawbar | |||
| Other | 2000 kg lift capacity with precision hydraulics, SLIPTO (Independent PTO), Creeper, and F/R Shuttle variants available, 75-lumen headlamps | |||
WARRANTY |
|||
|---|---|---|---|
| Warranty | 6000 Hours / 6 year | 2000 hr/2 year | 2000+4000 hours Or 2 + 4 year |
Compare tractors like New Holland 4010 VS Mahindra 475 DI and buy the best model according to your usage. The New Holland 4010 comes in 39 HP, whereas the Mahindra 475 DI has a 39 HP engine. Along with this, the engine capacity of the New Holland 4010 tractor is 2500 CC, while Mahindra 475 DI has 2731 CC engine capacity. While compare tractors online, you should check every feature of New Holland 4010, and Mahindra 475 DI. For instance, the New Holland 4010 has a 1500 KG lifting capacity, whereas the Mahindra 475 DI has a 1700 /2000 kg KG lifting capacity which makes the tractor compatible with related equipment.
Read More
Read Less
Select Tractor
