New Holland
3037 Tx
Mahindra
475 DI
Massey Ferguson
241 DI
ENGINE |
New Holland 3037 Tx |
Mahindra 475 DI |
Massey Ferguson 241 DI |
|---|---|---|---|
| HP Category | 39 HP | 42 HP | 42 HP |
| Engine Capacity | 2500 cc | 2731 cc | 2500 cc |
| Engine Rated RPM | 2000 RPM | 2000 ± (50) RPM | 1900 RPM |
| Max Torque | 149.6 | 194 | |
| No of Cylinder | 3 | 4 | 3 |
| Air Filter | Oil bath type with Pre-cleaner | Wet | Dry type |
| Cooling System | Water Cooled | Water Cooled/Thermostat | Water Cooled |
TRANSMISSION (GEARBOX) |
|||
|---|---|---|---|
| Clutch type | Single/Double Clutch with IPTO Lever* | Single, Dual and SLIPTO | Dual Clutch |
| Transmission type | Constant Mesh AFD Side Shift | Partial Constant Mesh (CS),Full Constant Mesh(SS),SLIPTO | Sliding mesh |
| Gear Level Position | - | - | Center Shift |
| Speed min-max | 2.54 - 28.16 kmph | NA | 30.36 kmph |
| Reverse speed min - max | 3.11 - 9.22 kmph | - | kmph |
| Forward Gears | 8 / 8 | 8 | 8 |
| Reverse Gears | 2 / 8 | 2 | 2 |
| Rear Axle | Straight Axle Planetary Drive | - | |
BRAKES |
|||
|---|---|---|---|
| Brake Type | Oil Immersed Multi Disc Brake | Dry Disc Brakes / Oil Immersed | Sealed Dry Disc Brakes |
| Turning radius with brake | 2810 mm | NA | 2850 mm |
STEERING |
|||
|---|---|---|---|
| Steering Type | Mechanical / Power Steering | Mechanical / Power Steering | Mechanical Steering |
POWER TAKE OFF |
|||
|---|---|---|---|
| PTO type | MultiSpeed PTO & Reverse PTO | 6 Spline | Single Speed PTO, Six-splined shaft |
| PTO RPM | 540S, 540E | 540, 540 &540E, 540 and Reverse | 540 |
| PTO POWER | 37 HP | 37.4 HP | 35.7 HP |
FUEL CAPACITY |
|||
|---|---|---|---|
| Fuel Tank Capacity | 42 litres | 48 litres | 47 litres |
DIMENSION AND WEIGHT |
|||
|---|---|---|---|
| Weight | 1715 kg | 1950 kg | 1875 kg |
| Wheelbase | 1990 mm | 1945 mm | 1785 mm |
| Overall Length | 3590 mm | 3260 mm | 3340 mm |
| Tractor width | 1790 | 1625 | 1690 |
| Ground Clearance | 390 | 350 | 345 |
LIFTING CAPACITY (HYDRAULICS) |
|||
|---|---|---|---|
| Lift capacity in kg | 1800 kg | 1700 /2000 kg kg | 1700 kg |
| 3 Point linkage | Category - II | High precision | Category - II |
TYRE SIZE |
|||
|---|---|---|---|
| Front | 6 x 16 / 6.50 x 16 | 6 X 16 | 6 X 16 |
| Rear | 13.6 X 28 | 12.4 X 28 / 13.6 X 28 | 13.6 X 28 |
ADDITIONAL FEATURES |
||||
|---|---|---|---|---|
| Accessories | Tools,Bumper,Top Link,Canopy,Hitch,Drawbar,Ballast Weight | |||
| Other | Heavy Duty Front Axle Support, Deluxe Driver Seat, Softek Clutch, Multisensing with DRC Valve, Tipping Trailer Pipe, Neutral Safety Switch, Clutch Safety Lock, Antiglare Rear View Mirror, Semi Flat Platform, Polymer Fuel Tank | 2000 kg lift capacity with precision hydraulics, SLIPTO (Independent PTO), Creeper, and F/R Shuttle variants available, 75-lumen headlamps | Chain Stabiliser, Check chain, Front Bumper, 7 pin Trailer Socket | |
WARRANTY |
|||
|---|---|---|---|
| Warranty | 6000 Hours / 6 year | 2000 hr/2 year | 2000 hr/2 year |
Compare tractors like New Holland 3037 Tx VS Mahindra 475 DI and buy the best model according to your usage. The New Holland 3037 Tx comes in 39 HP, whereas the Mahindra 475 DI has a 39 HP engine. Along with this, the engine capacity of the New Holland 3037 Tx tractor is 2500 CC, while Mahindra 475 DI has 2731 CC engine capacity. While compare tractors online, you should check every feature of New Holland 3037 Tx, and Mahindra 475 DI. For instance, the New Holland 3037 Tx has a 1800 KG lifting capacity, whereas the Mahindra 475 DI has a 1700 /2000 kg KG lifting capacity which makes the tractor compatible with related equipment.
Read More
Read Less
Select Tractor
