Mahindra
475 DI
New Holland
3230 TX
Eicher
551
ENGINE |
Mahindra 475 DI |
New Holland 3230 TX |
Eicher 551 |
|---|---|---|---|
| HP Category | 42 HP | 42 HP | 49 HP |
| Engine Capacity | 2731 cc | 2500 cc | 3300 cc |
| Engine Rated RPM | 2000 ± (50) RPM | 2000 RPM | RPM |
| Max Torque | 194 | 166 | |
| No of Cylinder | 4 | 3 | 3 |
| Air Filter | Wet | Oil Bath with Pre-Cleaner | Dry type |
| Cooling System | Water Cooled/Thermostat | - | Water Cooled |
TRANSMISSION (GEARBOX) |
|||
|---|---|---|---|
| Clutch type | Single, Dual and SLIPTO | Single / Dual clutch | Single / Dual Clutch |
| Transmission type | Partial Constant Mesh (CS),Full Constant Mesh(SS),SLIPTO | Fully Constant Mesh AFD | Partial Constant Mesh |
| Gear Level Position | - | Side Shift | Side Shift |
| Speed min-max | NA | 2.39-29.51 kmph | 32.93 kmph |
| Reverse speed min - max | - | 3.11-11.30 kmph | kmph |
| Rear Axle | - | Straight Axle Planetary Drive | |
BRAKES |
|||
|---|---|---|---|
| Brake Type | Dry Disc Brakes / Oil Immersed | Real Oil Immersed Brake | Multi disc oil immersed brakes |
| Turning radius with brake | NA | NA | |
STEERING |
|||
|---|---|---|---|
| Steering Type | Mechanical / Power Steering | Power Steering | Mechanical / Power Steering |
POWER TAKE OFF |
|||
|---|---|---|---|
| PTO type | 6 Spline | Multi Speed & Reverse PTO | Live, Six splined shaft |
| PTO RPM | 540, 540 &540E, 540 and Reverse | 540 & 540 E | 540 @ 1944 ERPM |
| PTO POWER | 37.4 HP | NA | 42 HP |
FUEL CAPACITY |
|||
|---|---|---|---|
| Fuel Tank Capacity | 48 litres | 42 litres | 45 litres |
DIMENSION AND WEIGHT |
|||
|---|---|---|---|
| Weight | 1950 kg | 1770 kg | 2190 kg |
| Wheelbase | 1945 mm | 1920 mm | 1980 mm |
| Overall Length | 3260 mm | 3595 mm | 3660 mm |
| Tractor width | 1625 | 1790 | 1775 |
| Ground Clearance | 350 | 385 | |
LIFTING CAPACITY (HYDRAULICS) |
|||
|---|---|---|---|
| Lift capacity in kg | 1700 /2000 kg kg | 1800 kg | 2100 kg |
| 3 Point linkage | High precision | Category - II | |
| Hydraulic Controls | ADDC | Draft, position and response control | |
TYRE SIZE |
|||
|---|---|---|---|
| Front | 6 X 16 | 6.0 X 16 | 6.0 X 16 / 7.5 X 16 / 8.3 X 20 |
| Rear | 12.4 X 28 / 13.6 X 28 | 13.6 x 28 | 14.9 X 28 / 14.9 X 28 |
ADDITIONAL FEATURES |
||||
|---|---|---|---|---|
| Other | 2000 kg lift capacity with precision hydraulics, SLIPTO (Independent PTO), Creeper, and F/R Shuttle variants available, 75-lumen headlamps | Paddy Special - Double Metal Face Sealing, 4WD, Synchro Shuttle, 8F+8R, Double Clutch | Auxilary pump with spool valve | |
WARRANTY |
|||
|---|---|---|---|
| Warranty | 2000 hr/2 year | NA | 2000 hr/2 year |
Compare tractors like Mahindra 475 DI VS New Holland 3230 TX and buy the best model according to your usage. The Mahindra 475 DI comes in 42 HP, whereas the New Holland 3230 TX has a 42 HP engine. Along with this, the engine capacity of the Mahindra 475 DI tractor is 2731 CC, while New Holland 3230 TX has 2500 CC engine capacity. While compare tractors online, you should check every feature of Mahindra 475 DI, and New Holland 3230 TX. For instance, the Mahindra 475 DI has a 1700 /2000 kg KG lifting capacity, whereas the New Holland 3230 TX has a 1800 KG lifting capacity which makes the tractor compatible with related equipment.
Read More
Read Less
Select Tractor
