Mahindra
475 DI
New Holland
3230 Nx
Sonalika
DI 47 HDM+ Tiger Series
ENGINE |
Mahindra 475 DI |
New Holland 3230 Nx |
Sonalika DI 47 HDM+ Tiger Series |
|---|---|---|---|
| HP Category | 42 HP | 42 HP | 47 HP |
| Engine Capacity | 2731 cc | 2500 cc | 3065 cc |
| Engine Rated RPM | 2000 ± (50) RPM | 2000 RPM | 1900 RPM |
| Max Torque | 194 | 166 | 205 |
| No of Cylinder | 4 | 3 | 3 |
| Air Filter | Wet | Oil bath type with Pre-cleaner | Dry type |
| Cooling System | Water Cooled/Thermostat | Water Cooled |
TRANSMISSION (GEARBOX) |
|||
|---|---|---|---|
| Clutch type | Single, Dual and SLIPTO | Single Clutch/ Double Clutch* | Single / Dual |
| Transmission type | Partial Constant Mesh (CS),Full Constant Mesh(SS),SLIPTO | Constant Mesh AFD Side Shift | Constant Mesh |
| Gear Level Position | - | Side Shift | Side Shift |
| Speed min-max | NA | 2.92 – 33.06 kmph | |
| Reverse speed min - max | - | 3.61 – 13.24 kmph | kmph |
| Forward Gears | 8 | 8 | 12 |
| Reverse Gears | 2 | 2 | 12 |
| Rear Axle | - | Outboard Reduction | |
BRAKES |
|||
|---|---|---|---|
| Brake Type | Dry Disc Brakes / Oil Immersed | Real Oil Immersed Multi Disc Brake | Multi Disk Oil Immersed Brakes |
| Turning radius with brake | NA | 3010 mm | |
STEERING |
|||
|---|---|---|---|
| Steering Type | Mechanical / Power Steering | Power Steering | Hydrostatic Power Steering |
POWER TAKE OFF |
|||
|---|---|---|---|
| PTO type | 6 Spline | IPTO / Economy PTO | 6 Spline |
| PTO RPM | 540, 540 &540E, 540 and Reverse | 540S, 540E* | 540, Reverse |
| PTO POWER | 37.4 HP | 39 HP | NA |
FUEL CAPACITY |
|||
|---|---|---|---|
| Fuel Tank Capacity | 48 litres | 42 litres | NA |
DIMENSION AND WEIGHT |
|||
|---|---|---|---|
| Weight | 1950 kg | 1750 kg | 0-0 kg |
| Wheelbase | 1945 mm | 1920 mm | 0-0 mm |
| Overall Length | 3260 mm | 3270 mm | 0-0 mm |
| Tractor width | 1625 | 1680 | 0-0 |
| Ground Clearance | 350 | 385 | 0-0 |
LIFTING CAPACITY (HYDRAULICS) |
|||
|---|---|---|---|
| Lift capacity in kg | 1700 /2000 kg kg | 1500 kg | 1800 kg |
| 3 Point linkage | High precision | Category - I & II | |
| Hydraulic Controls | ADDC | ADDC | |
TYRE SIZE |
|||
|---|---|---|---|
| Front | 6 X 16 | 6 X 16 | 6.5 X 16 / 6 X 16 |
| Rear | 12.4 X 28 / 13.6 X 28 | 13.6 X 28 | 14.9 X 28 |
ADDITIONAL FEATURES |
||||
|---|---|---|---|---|
| Drive type | 2WD | 2WD | 2WD / 4WD | |
| Other | 2000 kg lift capacity with precision hydraulics, SLIPTO (Independent PTO), Creeper, and F/R Shuttle variants available, 75-lumen headlamps | Heavy Duty Front Axle Support, Softek Clutch, Multisensing with DRC Valve, Tipping Trailer Pipe, Neutral Safety Switch, Antiglare Rear View Mirror, Polymer Fuel Tank | ||
WARRANTY |
|||
|---|---|---|---|
| Warranty | 2000 hr/2 year | 6000 Hours / 6 year | |
Compare tractors like Mahindra 475 DI VS New Holland 3230 Nx and buy the best model according to your usage. The Mahindra 475 DI comes in 42 HP, whereas the New Holland 3230 Nx has a 42 HP engine. Along with this, the engine capacity of the Mahindra 475 DI tractor is 2731 CC, while New Holland 3230 Nx has 2500 CC engine capacity. While compare tractors online, you should check every feature of Mahindra 475 DI, and New Holland 3230 Nx. For instance, the Mahindra 475 DI has a 1700 /2000 kg KG lifting capacity, whereas the New Holland 3230 Nx has a 1500 KG lifting capacity which makes the tractor compatible with related equipment.
Read More
Read Less
Select Tractor
