ENGINE |
Mahindra 475 DI |
New Holland 3037 TX 4WD |
Eicher 242 |
|---|---|---|---|
| HP Category | 42 HP | 39 HP | 25 HP |
| Engine Capacity | 2731 cc | NA | 1557 cc |
| Engine Rated RPM | 2000 ± (50) RPM | 2000 RPM | 1900 RPM |
| Max Torque | 194 | - | - |
| No of Cylinder | 4 | 3 | 1 |
| Air Filter | Wet | Oil bath type with Pre-cleaner | 4 stage filter |
| Cooling System | Water Cooled/Thermostat | Water Cooled | Air cooled |
TRANSMISSION (GEARBOX) |
|||
|---|---|---|---|
| Clutch type | Single, Dual and SLIPTO | Single/Double Clutch with IPTO Lever* | Single Clutch |
| Transmission type | Partial Constant Mesh (CS),Full Constant Mesh(SS),SLIPTO | Constant Mesh AFD Side Shift | Sliding Mesh |
| Gear Level Position | - | - | Center Shift |
| Speed min-max | NA | NA | 27.61 kmph |
| Reverse speed min - max | - | - | kmph |
| Forward Gears | 8 | 8 / 8 | 8 |
| Reverse Gears | 2 | 2 / 8 | 2 |
| Rear Axle | - | Straight Axle Planetary Drive | |
BRAKES |
|||
|---|---|---|---|
| Brake Type | Dry Disc Brakes / Oil Immersed | Oil Immersed Multi Disc Brake | Sealed dry disc brakes, Oil immersed brakes (Optional) |
| Turning radius with brake | NA | NA | |
STEERING |
|||
|---|---|---|---|
| Steering Type | Mechanical / Power Steering | Power Steering | Mechanical Steering / Power Steering (Optional) |
POWER TAKE OFF |
|||
|---|---|---|---|
| PTO type | 6 Spline | MultiSpeed PTO & Reverse PTO | Live, Twenty one splined shaft |
| PTO RPM | 540, 540 &540E, 540 and Reverse | 540S, 540E | 1000 RPM @ 1616 ERPM |
| PTO POWER | 37.4 HP | 37 HP | 21.25 HP |
FUEL CAPACITY |
|||
|---|---|---|---|
| Fuel Tank Capacity | 48 litres | 42 litres | 35 litres |
DIMENSION AND WEIGHT |
|||
|---|---|---|---|
| Weight | 1950 kg | 2020 kg | 1670 kg |
| Wheelbase | 1945 mm | 2000 mm | 1880 mm |
| Overall Length | 3260 mm | 3590 mm | 3150 mm |
| Tractor width | 1625 | 2080 | 1650 |
| Ground Clearance | 350 | 360 | |
LIFTING CAPACITY (HYDRAULICS) |
|||
|---|---|---|---|
| Lift capacity in kg | 1700 /2000 kg kg | 1800 kg | 1220 kg |
| 3 Point linkage | High precision | Category - II | |
| Hydraulic Controls | ADDC | Draft, Position and Response control | |
TYRE SIZE |
|||
|---|---|---|---|
| Front | 6 X 16 | 8 X 18 | 6 X 16 |
| Rear | 12.4 X 28 / 13.6 X 28 | 13.6 x 28 | 12.4 X 28 |
ADDITIONAL FEATURES |
||||
|---|---|---|---|---|
| Drive type | 2WD | 4WD | 2WD | |
| Other | 2000 kg lift capacity with precision hydraulics, SLIPTO (Independent PTO), Creeper, and F/R Shuttle variants available, 75-lumen headlamps | Synchro Shuttle, Paddy Special - Double Metal Face Sealing, Heavy Duty Front Axle Support, Multisensing with DRC Valve, Tipping Trailer Pipe, Neutral Safety Switch, Clutch Safety Lock, Antiglare Rear View Mirror, Semi Flat Platform, Polymer Fuel Tank Optional Features | ||
WARRANTY |
|||
|---|---|---|---|
| Warranty | 2000 hr/2 year | NA | 2000 hr/2 year |
Compare tractors like Mahindra 475 DI VS New Holland 3037 TX 4WD and buy the best model according to your usage. The Mahindra 475 DI comes in 42 HP, whereas the New Holland 3037 TX 4WD has a 42 HP engine. Along with this, the engine capacity of the Mahindra 475 DI tractor is 2731 CC, while New Holland 3037 TX 4WD has CC engine capacity. While compare tractors online, you should check every feature of Mahindra 475 DI, and New Holland 3037 TX 4WD. For instance, the Mahindra 475 DI has a 1700 /2000 kg KG lifting capacity, whereas the New Holland 3037 TX 4WD has a 1800 KG lifting capacity which makes the tractor compatible with related equipment.
Read More
Read Less