Mahindra
475 DI
New Holland
3037 Nx
Massey Ferguson
1035 DI
ENGINE |
Mahindra 475 DI |
New Holland 3037 Nx |
Massey Ferguson 1035 DI |
|---|---|---|---|
| HP Category | 42 HP | 39 HP | 36 HP |
| Engine Capacity | 2731 cc | 2500 cc | 2400 cc |
| Engine Rated RPM | 2000 ± (50) RPM | 2000 RPM | RPM |
| Max Torque | 194 | - | - |
| No of Cylinder | 4 | 3 | 3 |
| Air Filter | Wet | Oil bath type with Pre-cleaner | Dry type |
| Cooling System | Water Cooled/Thermostat | - | Water Cooled |
TRANSMISSION (GEARBOX) |
|||
|---|---|---|---|
| Clutch type | Single, Dual and SLIPTO | Single Clutch | Single |
| Transmission type | Partial Constant Mesh (CS),Full Constant Mesh(SS),SLIPTO | Constant Mesh AFD Side Shift | Sliding Mesh |
| Gear Level Position | - | - | Center Shift |
| Speed min-max | NA | 2.42 – 29.67 kmph | 23.8 kmph |
| Reverse speed min - max | - | 3.00 – 11.88 kmph | kmph |
| Forward Gears | 8 | 8 | 6 / 8 |
| Rear Axle | - | Outboard Reduction | |
BRAKES |
|||
|---|---|---|---|
| Brake Type | Dry Disc Brakes / Oil Immersed | Oil Immersed Multi Disc Brake | Dry Disc Brakes |
| Turning radius with brake | NA | NA | 2800 mm |
STEERING |
|||
|---|---|---|---|
| Steering Type | Mechanical / Power Steering | Mechanical / Power Steering | Manual Steering |
POWER TAKE OFF |
|||
|---|---|---|---|
| PTO type | 6 Spline | NA | Live, Single-speed PTO |
| PTO RPM | 540, 540 &540E, 540 and Reverse | 540S, 540E | 540 RPM @ 1650 ERPM |
| PTO POWER | 37.4 HP | 35 HP | 30.6 HP |
FUEL CAPACITY |
|||
|---|---|---|---|
| Fuel Tank Capacity | 48 litres | 42 litres | 47 litres |
DIMENSION AND WEIGHT |
|||
|---|---|---|---|
| Weight | 1950 kg | 1800 kg | 1713 kg |
| Wheelbase | 1945 mm | 1920 mm | 1830 mm |
| Overall Length | 3260 mm | 3365 mm | 3120 mm |
| Tractor width | 1625 | 1685 | 1675 |
| Ground Clearance | 350 | 380 | |
LIFTING CAPACITY (HYDRAULICS) |
|||
|---|---|---|---|
| Lift capacity in kg | 1700 /2000 kg kg | 1500 kg | 1100 kg |
| 3 Point linkage | High precision | HP Hydraulic with Multi sensing Point | Category-1 |
| Hydraulic Controls | ADDC | ADDC | Draft, position and response control |
TYRE SIZE |
|||
|---|---|---|---|
| Front | 6 X 16 | 6.0 X 16 | 6 X 16 |
| Rear | 12.4 X 28 / 13.6 X 28 | 13.6 X 28 | 12.4 x 28 /13.6 x 28 |
ADDITIONAL FEATURES |
||||
|---|---|---|---|---|
| Other | 2000 kg lift capacity with precision hydraulics, SLIPTO (Independent PTO), Creeper, and F/R Shuttle variants available, 75-lumen headlamps | Remote Valve, Paddy Special - Double Metal Face Sealing, 55kg FWC,Heavy Duty Front Axle Support, Std. Driver Seat, Softek Clutch, Multisensing with DRC Valve, Tipping Trailer Pipe, 90 kg HD Front Bumper, Neutral Safety Switch, Clutch Safety Lock, Antiglare Rear View Mirror, Semi Flat Platform | ||
WARRANTY |
|||
|---|---|---|---|
| Warranty | 2000 hr/2 year | 6000 Hours / 6 year | 2000 hr / 2 year |
Compare tractors like Mahindra 475 DI VS New Holland 3037 Nx and buy the best model according to your usage. The Mahindra 475 DI comes in 42 HP, whereas the New Holland 3037 Nx has a 42 HP engine. Along with this, the engine capacity of the Mahindra 475 DI tractor is 2731 CC, while New Holland 3037 Nx has 2500 CC engine capacity. While compare tractors online, you should check every feature of Mahindra 475 DI, and New Holland 3037 Nx. For instance, the Mahindra 475 DI has a 1700 /2000 kg KG lifting capacity, whereas the New Holland 3037 Nx has a 1500 KG lifting capacity which makes the tractor compatible with related equipment.
Read More
Read Less
Select Tractor
