ENGINE |
John Deere 5210 |
Mahindra 575 DI |
Massey Ferguson 245 DI |
|---|---|---|---|
| HP Category | 50 HP | 45 HP | 46 HP |
| Engine Capacity | 2900 cc | 2979 cc | 2700 cc |
| Engine Rated RPM | 2400 RPM | 2000 ± (50) RPM | 2000 RPM |
| Max Torque | - | 207 | |
| No of Cylinder | 3 | 4 | 3 |
| Air Filter | Dry Type, Dual Element | Wet | Dry type with pre-cleaner |
| Cooling System | Coolant cooled with overflow reservoir | Water Cooled/Thermostat | Water Cooled |
TRANSMISSION (GEARBOX) |
|||
|---|---|---|---|
| Clutch type | Dual Clutch | Single, Dual and SLIPTO | Dual clutch |
| Transmission type | Collarshift | Partial Constant Mesh (CS),Full Constant Mesh(SS),SLIPTO | Partial constant mesh |
| Gear Level Position | Side Shift | - | |
| Speed min-max | 2.1 – 30.1 kmph | NA | 34.2 kmph |
| Reverse speed min - max | 3.6 – 23.3 kmph | 8/8/16 kmph | kmph |
| Forward Gears | 9 | 2/8/4 | 8/10 |
| Reverse Gears | 3 | 2 | 2 |
| Rear Axle | - | - | |
BRAKES |
|||
|---|---|---|---|
| Brake Type | Oil Immersed Disc Brakes | Oil Immersed Brake | Sealed dry disc brakes |
| Turning radius with brake | 3181 mm | NA | 2800 mm |
STEERING |
|||
|---|---|---|---|
| Steering Type | Hydraulics Power Steering | Mechanical / Power Steering | Manual steering / Power steering |
POWER TAKE OFF |
|||
|---|---|---|---|
| PTO type | Independent, 6 Spline | 6 Spline | Live, Six-splined shaft Option: Quadra PTO |
| PTO RPM | 540 @ 2376 ERPM | 540, 540 &540E, 540 & Reverse | 540 RPM @ 1500 ERPM |
| PTO POWER | 42.5 HP | 41.8 HP | 42.5 HP |
FUEL CAPACITY |
|||
|---|---|---|---|
| Fuel Tank Capacity | 68 litres | 50 litres | 55 litres |
DIMENSION AND WEIGHT |
|||
|---|---|---|---|
| Weight | 2105 kg | 1860 kg | 1915 kg |
| Wheelbase | 2050 mm | 1945 mm | 1830 mm |
| Overall Length | 3540 mm | 3570 mm | 3320 mm |
| Tractor width | 1820 | 1980 | 1705 |
| Ground Clearance | 440 | 350 | 360 |
LIFTING CAPACITY (HYDRAULICS) |
|||
|---|---|---|---|
| Lift capacity in kg | 2000 kg | 1700 /2000 kg kg | 1700 kg |
| 3 Point linkage | Category - II | CAT-1 and CAT-2 balls | |
| Hydraulic Controls | ADDC | Draft, position and response control. | |
TYRE SIZE |
|||
|---|---|---|---|
| Front | 6 X 16 / 7.5 X 16 / 6.5 X 20 | 6 X 16 / 7.5 X 16 | 6 X 16 |
| Rear | 14.9 X 28 / 16.9 X 28 | 13.6 X 28 / 14.9 X 28 | 12.4 X 28 / 13.6 X 28 |
ADDITIONAL FEATURES |
||||
|---|---|---|---|---|
| Accessories | Tool, Toplink, Canopy, Hook, Bumpher, Drawbar | |||
| Other | Adjustable front axle, Heavy Duty Front Axle, Selective Control Valve (SCV), Reverse PTO (Standard + Reverse), Dual PTO (Standard + Economy), Synchromesh Transmission (TSS), Roll over protection system with deluxe seat & seat belt | 2000 kg lift capacity with precision hydraulics, SLIPTO (Independent PTO), Creeper, and F/R Shuttle variants available, 75-lumen headlamps | Push type pedals, adjustable dual-tone seat,SIMPSONS S325.5 TIII A Engine | |
WARRANTY |
|||
|---|---|---|---|
| Warranty | 5000 hr / 5 year | 6 year | |
Compare tractors like John Deere 5210 VS Mahindra 575 DI and buy the best model according to your usage. The John Deere 5210 comes in 50 HP, whereas the Mahindra 575 DI has a 50 HP engine. Along with this, the engine capacity of the John Deere 5210 tractor is 2900 CC, while Mahindra 575 DI has 2979 CC engine capacity. While compare tractors online, you should check every feature of John Deere 5210, and Mahindra 575 DI. For instance, the John Deere 5210 has a 2000 KG lifting capacity, whereas the Mahindra 575 DI has a 1700 /2000 kg KG lifting capacity which makes the tractor compatible with related equipment.
Read More
Read Less