ENGINE |
John Deere 5045D |
Mahindra 475 DI |
Sonalika Rx 745 III Sikander |
|---|---|---|---|
| HP Category | 45 HP | 42 HP | 50 HP |
| Engine Capacity | 2900 cc | 2731 cc | 3067 cc |
| Engine Rated RPM | 2100 RPM | 2000 ± (50) RPM | 1900 RPM |
| Max Torque | 179 | 194 | 205 |
| No of Cylinder | 3 | 4 | 3 |
| Air Filter | Dry type, Dual element | Wet | Dry type |
| Cooling System | Coolant cooled with overflow reservoir | Water Cooled/Thermostat | Water Cooled |
TRANSMISSION (GEARBOX) |
|||
|---|---|---|---|
| Clutch type | Single / Dual Clutch | Single, Dual and SLIPTO | Single/Dual clutch |
| Transmission type | Collarshift | Partial Constant Mesh (CS),Full Constant Mesh(SS),SLIPTO | Constant Mesh with Side Shifter |
| Gear Level Position | - | - | Side Shift |
| Speed min-max | 2.83 – 30.92 kmph | NA | 2.635- 33.27 kmph |
| Reverse speed min - max | 3.71 – 13.43 kmph | - | kmph |
| Forward Gears | 8 / 12 | 8 | 8 |
| Reverse Gears | 4 | 2 | 2 |
| Rear Axle | - | - | |
BRAKES |
|||
|---|---|---|---|
| Brake Type | Oil Immersed Disc Brakes | Dry Disc Brakes / Oil Immersed | Dry Disc/Oil Immersed Brakes (optional) |
| Turning radius with brake | 2900 mm | NA | 3385 mm |
STEERING |
|||
|---|---|---|---|
| Steering Type | Power Steering | Mechanical / Power Steering | Mechanical/Power Steering (optional) |
POWER TAKE OFF |
|||
|---|---|---|---|
| PTO type | Independent 6 Splines | 6 Spline | Single speed PTO |
| PTO RPM | 540 @ 2100,1600 ERPM | 540, 540 &540E, 540 and Reverse | 540 |
| PTO POWER | 38.20 HP | 37.4 HP | 43 HP |
FUEL CAPACITY |
|||
|---|---|---|---|
| Fuel Tank Capacity | 60 litres | 48 litres | 55 litres |
DIMENSION AND WEIGHT |
|||
|---|---|---|---|
| Weight | 1810 kg | 1950 kg | - |
| Wheelbase | 1970 mm | 1945 mm | 2089 mm |
| Overall Length | 3410 mm | 3260 mm | 3745 mm |
| Tractor width | 1810 | 1625 | 0 |
| Ground Clearance | 415 | 350 | 0 |
LIFTING CAPACITY (HYDRAULICS) |
|||
|---|---|---|---|
| Lift capacity in kg | 1600 kg | 1700 /2000 kg kg | 2000 kg |
| 3 Point linkage | Category - II | High precision | |
| Hydraulic Controls | ADDC | ADDC | |
TYRE SIZE |
|||
|---|---|---|---|
| Front | 6.00 x 16 | 6 X 16 | 6 X 16 / 7.5 X 16 |
| Rear | 13.6 X 28 | 12.4 X 28 / 13.6 X 28 | 13.6 X 28 / 14.9 X 28 |
ADDITIONAL FEATURES |
||||
|---|---|---|---|---|
| Accessories | Ballast weights / Canopy / Canopy holder / Draw bar / Wagon hitch | TOOL, TOPLINK, CANOPY, HOOK, BUMPER, DRAWBAR | ||
| Other | Collarshift type gear box,Finger gaurd,PTO NSS,Water separator,Underhood exhaust muffler | 2000 kg lift capacity with precision hydraulics, SLIPTO (Independent PTO), Creeper, and F/R Shuttle variants available, 75-lumen headlamps | ||
WARRANTY |
|||
|---|---|---|---|
| Warranty | 5000 hr/5 year | 2000 hr/2 year | 2000+3000 hours Or 2 + 3 year |
Compare tractors like John Deere 5045D VS Mahindra 475 DI and buy the best model according to your usage. The John Deere 5045D comes in 45 HP, whereas the Mahindra 475 DI has a 45 HP engine. Along with this, the engine capacity of the John Deere 5045D tractor is 2900 CC, while Mahindra 475 DI has 2731 CC engine capacity. While compare tractors online, you should check every feature of John Deere 5045D, and Mahindra 475 DI. For instance, the John Deere 5045D has a 1600 KG lifting capacity, whereas the Mahindra 475 DI has a 1700 /2000 kg KG lifting capacity which makes the tractor compatible with related equipment.
Read More
Read Less