John Deere
5045D PowerPro
Swaraj
855 FE
Sonalika
Rx 60
ENGINE |
John Deere 5045D PowerPro |
Swaraj 855 FE |
Sonalika Rx 60 |
|---|---|---|---|
| HP Category | 46 HP | 48 HP | 60 HP |
| Engine Capacity | 2900 cc | 3478 cc | 3707 cc |
| Engine Rated RPM | 2100 RPM | 2000 RPM | 2200 RPM |
| Max Torque | - | 205 | - |
| No of Cylinder | 3 | 3 | 4 |
| Air Filter | Dry type, Dual element | 3- Stage Oil Bath Type | Dry type |
| Cooling System | Coolant Cooled with overflow reservoir | Water Cooled | Water Cooled |
TRANSMISSION (GEARBOX) |
|||
|---|---|---|---|
| Clutch type | Single/Dual (Optional) clutch | Single/Dual clutch | Dual |
| Transmission type | Collarshift | Constant & Sliding Mesh | Constant mesh |
| Gear Level Position | Side Shift | Center Shift | |
| Speed min-max | 2.83 - 30.92 kmph | 3.1 – 30.9 kmph | 2.75 - 34.45 kmph |
| Reverse speed min - max | 3.71 - 13.43 kmph | 2.6 - 12.9 kmph | kmph |
| Forward Gears | 8 | 8/12 | 8 |
| Reverse Gears | 4 | 2/3 | 2 |
| Rear Axle | - | - | |
BRAKES |
|||
|---|---|---|---|
| Brake Type | Oil Immersed Disc Brakes | Dry Disc / Oil Immersed Brakes ( Optional ) | Oil Immersed Brakes |
| Turning radius with brake | 2900 mm | NA | |
STEERING |
|||
|---|---|---|---|
| Steering Type | Power Steering | Mechanical/Power Steering (optional) | Mechanical / Power Steering |
POWER TAKE OFF |
|||
|---|---|---|---|
| PTO type | Independent, 6 Spline | Multi Speed PTO / CRPTO | 6 Spline |
| PTO RPM | 540@1600/2100 ERPM | 540 / 1000 | 540, Reverse |
| PTO POWER | 39 HP | 42.9 HP | 51 HP |
FUEL CAPACITY |
|||
|---|---|---|---|
| Fuel Tank Capacity | 60 litres | 62 litres | 62 litres |
DIMENSION AND WEIGHT |
|||
|---|---|---|---|
| Weight | 1810 kg | 2020 kg | 2360- kg |
| Wheelbase | 1970 mm | 1845 mm | 2200-2235 mm |
| Overall Length | 3410 mm | 3575 mm | - mm |
| Tractor width | 1810 | 1845 | - |
| Ground Clearance | 415 | 400 | 425- |
LIFTING CAPACITY (HYDRAULICS) |
|||
|---|---|---|---|
| Lift capacity in kg | 1600 kg | 2000 kg | 2000 kg |
| 3 Point linkage | Category - II | Automatic Depth and Draft Control, I and II type implement pins. | |
| Hydraulic Controls | ADDC | ADDC | |
TYRE SIZE |
|||
|---|---|---|---|
| Front | 6.0 X 16 | 6 X 16 / 7.5 X 16 | 7.5 X 16 |
| Rear | 13.6 X 28 / 14.9 X 28 | 14.9 X 28 / 16.9 X 28 | 16.9 X 28 |
ADDITIONAL FEATURES |
||||
|---|---|---|---|---|
| Drive type | 2WD | 2WD | 2WD / 4WD | |
| Accessories | Ballast Weight, Hitch, Canopy | |||
| Other | Collarshift type gear box, Finger gaurd, PTO NSS, Water separator, Underhood exhaust muffler | |||
WARRANTY |
|||
|---|---|---|---|
| Warranty | 5000 hr / 5 year | 6000 hr/6 year | 2000 Hours / 2 year |
