Powertrac
435 Plus
Mahindra
YUVO 475 DI
Sonalika
DI 745 III
ENGINE |
Powertrac 435 Plus |
Mahindra YUVO 475 DI |
Sonalika DI 745 III |
|---|---|---|---|
| HP Category | 37 HP | 42 HP | 50 HP |
| Engine Capacity | 2146 cc | 2979 cc | 3067 cc |
| Engine Rated RPM | 2200 RPM | 1900 RPM | 2100 RPM |
| Max Torque | - | 178.68 | |
| No of Cylinder | 3 | 4 | 3 |
| Air Filter | Oil Bath | Dry type 6” | Oil Bath Type With Pre Cleaner |
| Cooling System | Water Cooled | Liquid Cooled | Water Cooled |
TRANSMISSION (GEARBOX) |
|||
|---|---|---|---|
| Clutch type | Single Clutch | Single clutch dry friction plate (Optional:- Dual clutch-CRPTO) | Single/Dual (Optional) |
| Transmission type | Fully Constant mesh | Full constant mesh | Constant Mesh with Side Shifter |
| Gear Level Position | Center Shift | - | |
| Speed min-max | 2.7 - 30.6 kmph | 30.61 kmph | 37.80 kmph |
| Reverse speed min - max | 3.3 - 10.2 kmph | 11.2 kmph | 12.39 kmph |
| Forward Gears | 8 | 12 | 8 |
| Reverse Gears | 2 | 3 | 2 |
| Rear Axle | Inboard Reduction | - | |
BRAKES |
|||
|---|---|---|---|
| Brake Type | Multi Plate Oil Immersed Disc Brake | Oil Immersed Brakes | Dry Disc/Oil Immersed Brakes (optional) |
| Turning radius with brake | NA | NA | |
STEERING |
|||
|---|---|---|---|
| Steering Type | Power Steering / Mechanical Single drop arm option | Power Steering | Mechanical/Power Steering (optional) |
POWER TAKE OFF |
|||
|---|---|---|---|
| PTO type | 6 Spline | Twin Speed PTO | 6 Spline |
| PTO RPM | 540 | 540 @ 1510 | 540 |
| PTO POWER | 33.20 HP | 30.6 HP | 40.8 HP |
FUEL CAPACITY |
|||
|---|---|---|---|
| Fuel Tank Capacity | 50 litres | 60 litres | 55 litres |
DIMENSION AND WEIGHT |
|||
|---|---|---|---|
| Weight | 1850 kg | 2020 kg | 2000 kg |
| Wheelbase | 2010 mm | 1925 mm | 2080 mm |
| Overall Length | 3225 mm | - | |
| Tractor width | 1750 | ||
| Ground Clearance | 375 | 425 | |
LIFTING CAPACITY (HYDRAULICS) |
|||
|---|---|---|---|
| Lift capacity in kg | 1600 kg | 1500 kg | 1600 kg |
| 3 Point linkage | Sensi - 1 | ||
| Hydraulic Controls | ADDC | Position control & Automatic draft control | |
TYRE SIZE |
|||
|---|---|---|---|
| Front | 6 X 16 | 6 X 16 | 6.0 x 16 / 6.5 x 16 / 7.5 x 16 |
| Rear | 12.4 X 28 / 13.6 X 28 | 13.6 X 28 / 14.9 X 28 | 13.6 x 28 / 14.9 x 28 |
ADDITIONAL FEATURES |
||||
|---|---|---|---|---|
| Accessories | Tools, Bumpher, Ballast Weight, Canopy, Top Link | TOOLS,BUMPHER,TOP LINK,CANOPY,HITCH,DRAWBAR | ||
| Other | High torque backup, 12 Forward + 3 Reverse | |||
WARRANTY |
|||
|---|---|---|---|
| Warranty | 5 year | 2000 hr/2 year | 2000 Hours 2 year |
