New Holland
3630 TX Plus+
Farmtrac
60 classic
Sonalika
DI 55 HDM+ Tiger Series
ENGINE |
New Holland 3630 TX Plus+ |
Farmtrac 60 classic |
Sonalika DI 55 HDM+ Tiger Series |
|---|---|---|---|
| HP Category | 50 HP | 50 HP | 55 HP |
| Engine Capacity | 2991 cc | 3100 cc | 4087 cc |
| Engine Rated RPM | 2300 RPM | 1850 RPM | 2000 RPM |
| Max Torque | - | - | 230 |
| No of Cylinder | 3 | 3 | 4 |
| Air Filter | Dry type | Wet type | Dry type |
| Cooling System | Water Cooled | Liquid cooled |
TRANSMISSION (GEARBOX) |
|||
|---|---|---|---|
| Clutch type | Double Clutch with Independent Clutch Lever | Dual Clutch | Dual / Double |
| Transmission type | Fully Constant mesh / Partial Synchro mesh* | Full constant mesh | Constant Mesh |
| Gear Level Position | - | Center Shift | Side Shift |
| Speed min-max | 0.94 - 31.60 kmph | 2.7 – 31.4 kmph | |
| Reverse speed min - max | 1.34 - 14.86 kmph | 4.1 – 14.8 kmph | kmph |
| Forward Gears | 8 | 8 | 12 |
| Reverse Gears | 2 | 2 | 12 |
| Rear Axle | - | Straight Axle | |
BRAKES |
|||
|---|---|---|---|
| Brake Type | Oil Immersed Multi Disc Brakes | Multi Plate Oil Immersed Brakes/Multi Plate Dry Brakes | Multi Disk Oil Immersed Brakes |
| Turning radius with brake | 3190 mm | 3250 mm | |
STEERING |
|||
|---|---|---|---|
| Steering Type | Power Steering | Balanced Power Steering | Hydrostatic Power Steering |
POWER TAKE OFF |
|||
|---|---|---|---|
| PTO type | Single PTO / GSPTO | 6 Spline | 6 Spline |
| PTO RPM | 540, Reverse, Ground speed | 540, Reverse | 540, Reverse |
| PTO POWER | 46 HP | 42.5 HP | NA |
FUEL CAPACITY |
|||
|---|---|---|---|
| Fuel Tank Capacity | 60 litres | 60 litres | NA |
DIMENSION AND WEIGHT |
|||
|---|---|---|---|
| Weight | 2080-2060 kg | 2035 kg | 0-0 kg |
| Wheelbase | 2045-2045 mm | 2110 mm | 0-0 mm |
| Overall Length | - mm | 3355 mm | 0-0 mm |
| Tractor width | - | 1735 | 0-0 |
| Ground Clearance | 445-445 | 370 | 0-0 |
LIFTING CAPACITY (HYDRAULICS) |
|||
|---|---|---|---|
| Lift capacity in kg | 1700 / 2000 kg | 1800 kg | 2000 kg |
| 3 Point linkage | Category I & II | ||
| Hydraulic Controls | ADDC | ADDC | |
TYRE SIZE |
|||
|---|---|---|---|
| Front | 7.5 X 16 / 9.5 X 24 | 6 X 16 / 7.5 X 16 | 7.5 X 16 / 6.5 X 20 |
| Rear | 14.9 X 28 / 16.9 X 28 | 13.6 X 28 / 14.9 X 28 | 16.9 X 28 |
ADDITIONAL FEATURES |
|||
|---|---|---|---|
| Drive type | 2WD / 4WD | 2WD | 2WD / 4WD |
WARRANTY |
|||
|---|---|---|---|
| Warranty | 6000 Hours / 6 year | 2000 hr/2 year | |
